How much power does a pool pump use

How much power does a pool pump use per hour?

Working on an average peak electricity tariff of 30 cents per hour, the average pool pump will cost 22.5 – 45 cents per hour to run. A Salt Chlorinator uses 0.12 – 0.2kw per hour and will cost 3.6 – 6 cents per hour to run.

How much power does a swimming pool pump use?

A typical swimming pool pump used on sand filter systems consumes between 750 and 1100 watts of power (or 0.75 kW and 1.1 kW). A light bulb consumes between 0.06 and 0.1 kW).

How much energy does a pool pump use per month?

So, if you run your pool pump for 8 hours in one day, 1,864.25 multiplied by 8 and divided by 1,000 equals 14.9 kilowatt-hours. If you run your pump every day for an average of 30 days per month — 30 multiplied by 14.9 — your pump uses 447 kilowatt-hours in a month.

How much power does a 1.5 HP pool pump use?

Most Energy Efficient Pool Pumps

Calculating Pool Pump Energy Use: Each horsepower uses 746 watts. For a 1.5 hp pool pump, multiply 746 watts by 1.5 hp, for a total of 1,119 watts. Most utilities charge from 10¢ to 15¢ per kilowatt-hour, and to know kilowatt-hours, multiply watts X hours and divide by 1,000.

Does a swimming pool pump use a lot of electricity?

Hi Joe, outside of the air conditioner, the pool pump is the largest energy consumer in the average pool-containing home. Pool pumps use up to 2,500 kWh per year to circulate and filter the water.

You might be interested:  How to hold a pool cue

Is it OK to leave pool pump running?

Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. … If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

How much electricity does a 1hp pool pump use?

Our 1 hp example pump uses 1.75 Kw per hour; whereas a 2 hp motor of the same type (UST1202) would draw 2.4 Kw per hour. That’s around 24 kWh per day, or around 720 kWh per month, just running only 10 hors per day. During the heat of the summer, many pumps need to run longer to maintain clear water.

12 hours

Is it better to run a pool pump at night or day?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

Is it cheaper to run a pool pump at night?

A. Although you may save money by running the pool at night, those extra dollars will almost certainly be paid out in additional chemical and operational costs. The main reason for running the pool pump during the daylight hours is to ensure proper sanitation.31 мая 2007 г.

You might be interested:  How much space does a pool table need

Can I replace a 1hp pool pump with a 1.5 HP?

However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower. Don’t fret if your motor is not labeled uprated or full rated. In many cases, it may not be labeled at all.

3 minutes

How much electricity does a 1hp motor use?

So, 1 HP for 24 hour = 746×24= 17904 Watt-hour which is equal to 17904/1000= 17.904 units. Hence, 17.904 units of Power will be consumed by the 1 HP motor when run continuously for 24 hours.

How much does it cost to run a pool pump 24 hours a day?

12 cents per kWh = 4.97 per day to operate the pool pump. Now if you are running the same pump, but with 230 Volt, the cost will be 2.49 per day.