How to hide pool equipment

How do I hide my pool equipment?

The simplest way to hide your pool pump and filter is to put up a small wall or screen to block the view, and the noise from the pump. If you are handy with wood, you can saw-up your own pool filter screen to hide the pool pump, or you can buy vinyl privacy walls at most home stores and garden centers.

How do you hide pool equipment with landscaping?

If you want to soften the backyard, add bushy bushes and fluffy grasses to hide your pool equipment and reduce pump noise. Just be sure to give lots of room for the plants to grow, without blocking sunlight and air flow to the equipment. Or if needed, grasses and bushes can be easily pruned, any time of year.

Should you enclose pool equipment?

You do not have to enclose your pool equipment (pump, filter, heater). A lot of people camouflage it with landscaping or a small fence, so that is not visible. Pool equipment is designed to be outdoors. As long it is taken care and properly maintained of there should be nothing to worry about.12 мая 2017 г.

Where do you put pool equipment?

This basic equipment usually takes up an area approximately 4’x4′. It is usually located within 40’or 50′ of the pool, but could be further away if needed.

  • Pick an inconspicuous place. …
  • Locate equipment at the house if possible. …
  • Try to keep the equipment at the level of the pool or lower. …
  • Stay close to the pool.
You might be interested:  How to use a shop vac to drain a pool

How many hours a day should you run a pool pump?

12 hours

Is pool equipment loud?

Any standard swimming pool pump churns within the range of 65–90 decibels. This is almost as loud as riding a motorcycle. It works as a detrimental factor to outdoor pool enjoyment. Even a 10% decrease in the pool pump sound can improve the situation to a large extent.

How do I quiet my neighbors pool pump?

14 Effective Ways How to Quiet a Noisy Pool Pump

  1. Raise the Water Level in Your Pool.
  2. Clean Out the Skimmer Baskets.
  3. Empty the Pump Basket.
  4. Level the Pool Pump and Filter.
  5. Install Vibration Pads.
  6. Tighten the Mounting Screws/Bolts.
  7. Clean the Impeller on Your Pool Pump.
  8. Replace Worn Out Bearings/Rebuild Pump Motor.

Should you run pool pump in rain?

Should you run pool pump when it is raining? Unless there is any chance of a thunderstorm then running the pump when it is raining won’t really matter one way or the other. Potentially there could be contaminants in the rain so these might be removed more easily if the pool pump is running.

How hard is it to move pool equipment?

Cost to Move Pool Equipment

It’s not cheap, or easy to move pool a pump, filter and heater to a new location. A pool company would probably charge $3,000-$6,000 for most moves, depending on how complicated your system is and how far it’s being moved.

Leave a Reply

Your email address will not be published. Required fields are marked *