How to move a slate pool table without taking it apart

How do you move a non slate pool table?

If you want to move yours to a new location and you need to disassemble it, here’s what you have to do.

  1. Remove the rails and legs of your non-slate pool table. Use a socket wrench to detach the rail bolts from the table. …
  2. Be careful with the ball return system. …
  3. Do not disassemble non-slate pool tables.

Can you move a pool table on its side?

The only exceptions are pool tables that are constructed to be placed on their sides (coin operated tables) or in a situation where there is a large opening that the table can be dollied out as a whole. You should still consult a professional pool table mover before moving your table yourself.

How heavy is a 8 foot slate pool table?

One piece of one inch slate for an 8 foot pool table is about 170 lbs. One piece of one inch slate for a 9 foot pool table weighs about 230 lbs. An 8 foot single piece slate weighs about 425 lbs.

How heavy is a 6ft slate pool table?

Answer: We can confirm the following weights: 6ft slate – 80kgs approx. 7ft slate – 100kgs approx. Complete 6ft table – 180kgs approx.

Can you move a 3 piece slate pool table?

Slate usually comes either in a solid piece or three pieces. Lift the slate off the pool table legs and set it in your transport vehicle. It’s safe to stack the pieces of slate on top of each other, but be sure each are properly fastened and don’t jostle against anything the might cause damage.

You might be interested:  How to replace a pool pump motor

How heavy is a slate pool table?

Depending on the exact size and model, a slate top pool table can weigh between 650 and 1,000 pounds. Their weight is primarily determined by their size and in particular, how many slates they have. Each slate weighs from 150lbs to 250 lbs, and most pool tables have 3 of them.19 мая 2015 г.

Are non slate pool tables good?

When you play pool on a non slate table it doesn’t mean that you won’t still enjoy the game. However, the same level of quality won’t be there as with a slate one. On the plus side though non slate tables are more affordable and that can mean you are able to afford one in some situations.

Are pool tables too heavy for the second floor?

Absolutely. Assuming your room is up to building code standards of course. Some of the homes that we’ve installed pool tables in upstairs have had floors that have flexed a bit. … With all three pieces of slate on top of the cabinet, we’re talking about over 500 pounds of weight on a standard size pool table.

What does 3 piece slate pool table mean?

Three piece slate tables start as a single piece of slate that is then cut into three pieces during the milling process. Three piece slate allow for precision leveling which is why many professional players prefer playing on three piece tables.

Leave a Reply

Your email address will not be published. Required fields are marked *