How to replaster a swimming pool

How often do you need to Replaster a pool?

every ten years

What is the average cost to Replaster a swimming pool?

The typical cost to have a pool replastered is between $4 and $7 per square foot. Assuming an average pool size of 16 feet by 32 feet, 4 feet deep on the shallow end and 8 feet on the deep end, that’s total of 1,088 square feet. If the cost is $5 per square foot, replastering would cost $5,440.

How long does it take to Replaster pool?

two days

Is Pebble Tec better than plaster?

Pebble Tec®

While it is more expensive than plaster, it is the highest quality pool resurfacing material available due to its longevity and ability to hide chemical residue. … A Pebble Tec® surface should last 20+ years with the proper care and maintenance.

How much does it cost to Replaster a 20 000 gallon pool?

Cost to Resurface or Replaster a Pool by FinishFinishCost (includes labor)*Plaster$5,500Aggregate (rough)$6,000Aggregate (smooth)$7,500Pebble$9,000

What is the most popular pool plaster color?


What is the best pool plaster?

Types of Pool Plaster

  • White Marble Plaster. Standard white plaster is the tried and true pool and spa surface finish. …
  • Diamond Brite. Combines durable quartz aggregate with white cement to create an accented, non-fading surface. …
  • QuartzScapes. Creates a brilliant and enduring appearance for your pool and spa. …
  • PebbleTech®

Why is my pool plaster rough?

Bad pool chemistry such as a high pH and/or calcium hardness among others are seen on the pool plaster surface soon within days or weeks. … Remember cement is the base of ALL POOL PLASTERS. Salt: Salt itself from a saltwater pool has issues of attacking cement in plaster over time causing a rough finish.

You might be interested:  How to balance pool chemicals

How do I know when to Replaster my pool?

Top 10 Signs You Have To Refinish Your Pool

  • Plaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. …
  • Surface Stains. …
  • Roughness. …
  • Check Cracks. …
  • Plaster Discolorations. …
  • Structural Cracks. …
  • Rust Stains. …
  • Loss of Pebbles.

5 мая 2017 г.

How is pool plaster applied?

Re-Plastering or New Whitecoat:

The pool is drained and acid etched several times. Chipping and cutting around all fittings and under the tile allows the new coat to be feathered up to the edges. A scratch coat is applied first, followed by a finish coat. The pool is filled immediately, as the plaster cures underwater.

How long does a concrete pool need to cure?

about 28 days

How thick should pool plaster be?

Swimming pool plaster topcoats should be of no less than 3/8-inch thickness. An online look at several pool builders shows they apply plaster to in-ground concrete pool at thicknesses from 3/8 inch up to 5/8 inch.

Leave a Reply

Your email address will not be published. Required fields are marked *