What chemicals do I need to start up my above ground pool?
- Stain & Scale Preventer.
- Granular Shock Chlorine.
- Chlorine Tablets.
- pH Increaser and/or pH Decreaser.
- Alkalinity and/or Calcium Increaser.
- Cyanuric Acid (Stabilizer)
- Algaecide and Clarifiers if needed.
- Complete Test Kit or Test Strips.
8 мая 2019 г.
How do you start a pool for the first time?
Filling your new pool for the first time?
- Place the garden hose in the deep end of the pool, making sure to tie a cloth over the end of the hose to diffuse the water pressure. …
- Test and correct the pH level to 7.2 – 7.6.
- In the early evening, add 2 cups of HTH® Granular for every 10 000 liters of pool water. …
- Filter continuously for 24 hours.
How do I prepare the ground for an above ground pool?
Proper preparation of your level foundation will yield many summers of fun in the sun.
- Choose the best area of your yard to set up your pool. …
- Mark the perimeter of the pool area. …
- Remove all sod and other vegetation from the area. …
- Determine the lowest point of the pool area. …
- Create a wood level.
What chemicals do you need to start a pool?
Chemicals Checklist: Everything You Need to Open Your Pool
- A good test kit or test strips for checking your pool’s pH, calcium hardness, total alkalinity, and chlorine levels.
- Chlorine granules or tablets.
- Shock treatment.
- Increaser/decreaser chemicals for alkalinity, calcium, and pH.
- Stain treatment.
Is shock and chlorine the same thing?
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock. … You should aim to keep the chlorine level at between 1 and 3 ppm.
Should I shock my pool when I first fill it up?
At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.17 мая 2018 г.
Can I fill my above ground pool overnight?
Usually on any above ground swimming pool we could have the pool filled within a couple of hours. … A fast swimming pool fill can increase the life of the pool liner. Over exposure of sunlight can cause the swimming pool liner to shrink and cause the pool liner to not fit correctly.
How soon after filling a pool Can you swim?
Do not swim in the pool until after the start-up procedure has been completed. Do not use any automatic pool cleaners for a minimum of three weeks after plastering.
What to do when you first fill your pool?
Pool Startup Chemicals Guide
- Optional Anti-scaling Product. If you’re filling your pool with fresh water, this is a good time to add an anti-stain or anti-scaling product. …
- Adjust the pH. The first step when treating your pool’s water is to adjust the pH. …
- Adjust Total Alkalinity. …
- Sanitize the Water. …
- Adjust Hardness. …
- Add Algaecide.
Can I put an above ground pool on grass?
Above ground pools can be installed in the space of a few hours and can be set up on sand, ground cloth, concrete or directly on your lawn. Preparing the ground is an essential step to help protect the bottom of your pool from tears and punctures.
How many inches of sand do I need for an above ground pool?
What should I put under my above ground pool to level?
Top Solutions on How to Level an Above Ground Pool
- Sand. …
- Concrete Slab or Pad. …
- Solid Foam. …
- Crushed Stone. …
- Use a Rolling Tamper. …
- Using Pavers Under the Above Ground Pool. …
- Leveling an Installed Above Ground Pool. …
- Ask for Suggestions from Friends.
How many chlorine tablets do I need for a 12ft pool?
Use 1 to 3 tablets at a time, depending on your pool size, or enough to establish and maintain a good chlorine level at all times. Small Intex pools, under 12′ diameter, should use 1″ tablets 2-4 at a time, in a chlorine floater.31 мая 2018 г.
Should you shock a new pool?
Every pool is different, and pools don’t need to be shocked, unless they need to be shocked – to remove bacteria, algae, chloramines or other contaminants, or to help clear cloudy pool water or some other water problem. You can test for chloramines and you can see algae, but bacteria and other pathogens are invisible.