What size pump do i need for my above ground pool

Do I need a pump for my above ground pool?

A: For a 35,000-gallon above ground pool with a turnover of eight hours, you will need a pool pump with a minimum flow rate of 73 GPM.

What supplies do I need for an above ground pool?

9 Best Pool Supplies You Absolutely Need

  1. Water Test Strips. We cannot stress how incredibly important water testing is for your pool maintenance. …
  2. Pool Shock. …
  3. Algae Brush. …
  4. Manual Vacuum. …
  5. Telescoping Pole. …
  6. Multi-Purpose Surface Cleaner. …
  7. Filter Cleaner. …
  8. Skimmer.

Can a pump be too big for a pool?

Too large of a pump can cause poor filter performance and even damage it, if the filter is not also oversized accordingly. Another possible consequence is pump cavitation in which bubbles form in the water inside the pump and then burst with great force, resulting in damage to the impeller and other internal parts.

How long should you run your above ground pool pump?

eight hours

Can I replace a 1hp pool pump with a 1.5 HP?

However, you can replace your 1.0 Full rated motor with a 1.5 HP uprated motor. This is because they both will have the same total horsepower. Don’t fret if your motor is not labeled uprated or full rated. In many cases, it may not be labeled at all.

How many GPH is a 1.5 HP pump?

6,950 GPH

How often should you drain your above ground pool?

every 3 to 5 years

How often should I shock my above ground pool?

When do you shock a pool? To be very specific, you should use it when combined chlorine exceeds 0.2. To generalize this we recommend using it at least once a week and no less than every other week. It is also good practice if you do not have an automatic pool cover, to shock after heavy rains.

You might be interested:  What is pool sand

How often should you change above ground pool water?

every five to seven years

What size pump do I need for a 10 000 gallon pool?

Step 1: Determine the MINIMUM FLOW RATE.Pool Size (US Gallons)Turnover (Hours)Minimum Flow Rate35,00010 Hours58 GPM24,0008 Hours50 GPM24,00010 Hours40 GPM18,0008 Hours38 GPMЕщё 2 строки

Can you over filter a pool?

Backwashing Your Pool Filter Too Often

Pool water washes funk and gunk out of your filter media, then exits through your filters backwash valve drain port. Backwashing is an important part of basic pool care, but overdoing it is one of the more common pool maintenance mistakes.

Do you run pool pump while swimming?

Although it’s generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. … If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.

Is it OK to run pool pump 24 hours a day?

Ideally, you should run your pump for 24 hours a day, but we know that’s unrealistic (and pricey), so let’s look for an answer that keeps your pool clean and your wallet full. Generally running your pool pump for 12-hours a day is a good option. … For a residential pool the water should turn over at least once per day.

Is it better to run a pool pump at night or day?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

You might be interested:  What kind of sand for pool base

Leave a Reply

Your email address will not be published. Required fields are marked *