How much does it cost to install a above ground pool?
Building an Above Ground PoolBuilding an above ground pool costsNational average cost$11,000Average range$10,000 – $12,000Minimum cost$1,500Maximum cost$16,000
How much does it cost to have someone install a pool?
Fiberglass pool pricing
Installed cost: The cost of installing a fiberglass pool depends on the extras you get but ranges from $10,000 for someone doing a full self-installation to $60,000 and above for a professionally installed pool near you. The average initial cost is $20,000 to $60,000.
Can you install an above ground pool yourself?
Installing your above ground swimming pool is actually easier than you may think… and we promise you can do it! With our video and detailed instructions you too can successfully install your own above ground pool. After you remove all grasses and level the area, the rest is just following the directions.
Is an above ground pool worth it?
An above ground pool is quicker and easier to install, there’s no need to dig into the ground and remove the debris that is left behind. … An above ground pool that uses a frame will cost more to buy and maintain, but will cost less than a below ground pool.
How long do above ground pools last?
The average above ground pool will last 7–15 years before the structure gives out. Their liners will last 5–9 years before they have to be replaced. For an in-ground structure, the longevity really is contingent on the type of pool. For example, fiberglass should last well over 20 years.
Is a pool worth the money?
Real Estate Value
Despite what you may have heard in the past, YES, an inground swimming pool does increase the value of your home. … A few years ago, the National Association of Realtors stated that on average, an inground swimming pool will increase a home’s value by 4–6%.
What’s the cheapest inground pool?
Basic vinyl liner pools are the least expensive inground swimming pool option. Vinyl liner swimming pools give you more swim area for the money and cost you less initially than a fiberglass pool or gunite pool.
How long does it take to install an in ground pool?
It generally takes between a week and 10 days to build an in-ground fiberglass swimming pool. Above-ground pools can be installed in a day or two but, for a permanent structure, there will need to be a deck around the pool as well as pool fencing.
Can you put an above ground pool on grass?
Above ground pools can be installed in the space of a few hours and can be set up on sand, ground cloth, concrete or directly on your lawn. Preparing the ground is an essential step to help protect the bottom of your pool from tears and punctures.
What is the best base for a above ground pool?
Above ground pools require a base material to be laid for the construction of the pool. Mason sand or stone dust base material is used most often. Mason sand, also known as pool sand, will create a very smooth bottom layer and is the most popular choice.
Do I need a fence around my above ground pool?
Although your might have decided to go with the above ground pool, the fencing requirements for the property are still the same. In most cases, you must have a fence of at least four feet tall. As long as the body of water (either in-ground or above ground) is at least 18 inches deep, you do need to install a fence.
What is the deepest above ground pool you can purchase?
You may be thinking above ground pools cannot be that deep, but they can actually go as far down as 8 feet or more! This is due to the elasticity of the vinyl liners. The vinyl liner can accommodate a space that may not be shaped exactly like a perfect pool. When installing, make sure it is over a gradual slope.