Swimming pool above ground installation

How much does it cost to install an above ground pool?

Building an Above Ground PoolBuilding an above ground pool costsNational average cost$11,000Average range$10,000 – $12,000Minimum cost$1,500Maximum cost$16,000

Can I install an above ground pool myself?

Installing your above ground swimming pool is actually easier than you may think… and we promise you can do it! With our video and detailed instructions you too can successfully install your own above ground pool. After you remove all grasses and level the area, the rest is just following the directions.

How deep do above ground pools go?

Typical above ground pool depths are 48 or 52 inches deep. Above-ground pools require a level surface and access to electricity and water.

Is an above ground pool worth it?

An above ground pool is quicker and easier to install, there’s no need to dig into the ground and remove the debris that is left behind. … An above ground pool that uses a frame will cost more to buy and maintain, but will cost less than a below ground pool.

Can I leave my above ground pool up all year?

It’s possible to leave your above-ground pool up all winter with the water in it, since draining it completely may cause it to collapse.

Can you put an above ground pool on grass?

Above ground pools can be installed in the space of a few hours and can be set up on sand, ground cloth, concrete or directly on your lawn. Preparing the ground is an essential step to help protect the bottom of your pool from tears and punctures.

You might be interested:  Swimming pool coping options

What should I put under my above ground pool to level?

Top Solutions on How to Level an Above Ground Pool

  1. Sand. …
  2. Concrete Slab or Pad. …
  3. Solid Foam. …
  4. Crushed Stone. …
  5. Use a Rolling Tamper. …
  6. Using Pavers Under the Above Ground Pool. …
  7. Leveling an Installed Above Ground Pool. …
  8. Ask for Suggestions from Friends.

What is the best base for a above ground pool?

Above ground pools require a base material to be laid for the construction of the pool. Mason sand or stone dust base material is used most often. Mason sand, also known as pool sand, will create a very smooth bottom layer and is the most popular choice.

Can you partially bury an above ground pool?

The short answer is yes, but the longer answer involves several conditions. Not just any pool can be buried, and not just in any area, and not just to any shape or depth. First, you need to make sure your above ground pool is built to be buried, as not all are.

How many years does above ground pool last?

The average above ground pool will last 7–15 years before the structure gives out. Their liners will last 5–9 years before they have to be replaced. For an in-ground structure, the longevity really is contingent on the type of pool. For example, fiberglass should last well over 20 years.

What is the most popular size above ground pool?

Now the most popular pools are 54” tall and they can actually hold 4′ of water. Two inches may not seem like a big difference but you will certainly notice it while you are swimming.

You might be interested:  What is the best swimming pool paint

Do you put sand under an above ground pool?

Sand is the recommended base material upon which an aboveground pool should sit. Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet.

Do I need a tarp under my pool?

Can I Put Tarp Under My Pool? Yes, in some cases, using tarp as an underlayment could be fine as long as you have removed any sharp debris and rocks underneath the above-ground pool. The tarp, however, won’t offer much smoothness to the pool floor so it may help to also add a layer of sand as well.

Leave a Reply

Your email address will not be published. Required fields are marked *