What is a float valve in pool?
The float valve in the bottom is designed to shut off the skimmer and keep it from sucking air into the pump if the water level in the pool gets too low. On some systems where the skimmer and drain are both plumbed into the skimmer, the float valve serves to regulate the flow of water from the skimmer and the drain.
How do you turn off auto fill in pool?
If you have an autofill, let’s turn off its water supply. Find the pool’s backflow device which is usually located at the back or the side of the house. The pool’s water supply line is usually the first line out of the pool’s backflow. Turn its shut-off valve to the off position.
Why does pool skimmer have two holes?
The second hole in the skimmer is connected to a pipe called an equalizer. … It prevents the pump from taking in air if the pool’s water level dips below the skimmer opening. If the pool water is low the pump pulls water from the equalizer line so the pump doesn’t run dry.
How do I control the water level in my pool?
Pool water level control sensors work by using 2 rods that come into contact with the pool waters surface. The energized sensor rods close the water filler valve by making a circuit when both sensors are in contact with the water.
How high should pool water be on skimmer?
The level at which pool skimmers function properly is between one third and about half way up the opening of the pool skimmer. If the water level is too high the debris floating next to the opening may pass by without being pulled into the skimmer.
What is an autofill for a pool?
Auto fills automatically adjust your swimming pool’s water level, preventing damage to pool equipment. Unlike using a hose or manual fill line to add water to your pool, auto-fills will keep your pool at its optimal water level without you needing to constantly be monitoring your pool’s water levels.