# Swimming pool water volume calculator

## How do you calculate volume of a swimming pool?

Length x width x depth x 7.5 = volume (in gallons)

Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

## How many Litres of water is in a swimming pool?

How much water does an Olympic sized swimming pool hold? 2,500,000 litres or 2.5 megalitres of water. Olympic size pools measure: 50 metres long, 25 metres wide, and a minimum of 2 metres deep. 660,430 gallons of water.

## What is the average volume of a pool?

Common Pool Sizes and Its Capacity In GallonsPool SizeUS Gallons16 ft x 36 ft21,60018 ft x 36 ft24,30020 ft x 40 ft30,00020 ft x 44 ft33,000

## What is a good size swimming pool?

This is important as you could expect that a person of any age could be utilizing the pool. It’s recommended having a depth fewer than six feet to meet most pool needs. For a family of six to eight people, an 18 foot by 36-foot pool is recommended.

## How do I calculate volume?

Units of Measure

1. Volume = length x width x height.
2. You only need to know one side to figure out the volume of a cube.
3. The units of measure for volume are cubic units.
4. Volume is in three-dimensions.
5. You can multiply the sides in any order.
6. Which side you call length, width, or height doesn’t matter.

## How many gallons is a 16×32 pool?

Standard In-Ground Pool Volumes in Gallons by Size14x2810,30011,80015×3011,80013,50016×3213,40015,40018×3617,00019,400

You might be interested:  Glass swimming pool fences

## How long does it take to fill up an Olympic size swimming pool?

An Olympic pool has 660,253.09 gallons of water. A standard bathroom faucet has a restrictor to limit it to 2.2 G/Min. If you ran one faucet non stop, you would fill the pool in 208 days, 9 hours, 55 minutes.

## How do you calculate maximum pool capacity?

Measure the areas of the pool that are shallow and use the correct formula to calculate the surface area in square feet for the shallow areas of the pool. c. Divide this number you found in step “b” by 15. Round this number down (for example, if the result is 2.6, the maximum number of persons allowed is 2 persons).

## How much does it cost to fill a 10000 gallon pool?

Determine CostGallons Of WaterCost To Fill With Water5,000\$4510,000\$9015,000\$13520,000\$180

## Is 20×40 a big pool?

This is by no means the largest swimming pool size you can build or install, but it is among the most popular of the larger pool sizes. … A 20×40 concrete pool can cost you over \$100,000, but this cost varies by project.